We are always looking for ways to save money when it comes to building maintenance because annual bills can be a considerable amount. we waste huge amounts of money trying to keep walls looking in pristine condition by regularly painting them, filling holes and smoothing down uneven surfaces. The worst things that happen to walls is loose tiles, chipped plaster and sharp corners which building managers are on the lookout for. If someone comes into contact with defective walls they can be injured and on a less serious note they are unsightly to look at. Corner protection, plastic wall panelling and bump rails are some of the ways in which we can reduce the amount of money spent every year on maintaining the interior of out buildings.

Busy buildings include hospitals, schools, offices and supermarkets. As well as people, machinery and equipment also moves through the corridors, like wheelchairs, trolleys and hospital beds. When these things come into contact with the walls damage can occur to the corners of walls and this can be dangerous and not nice to look at. paying your building maintenance staff and getting supplies needed to fix the damage, or using contracted in workers can be a very expensive job.

To save this money you should use protective materials which can absorb high impacts and save the wall underneath from damage. Corner angles and trims made from PVCu materials like Vinylac are ideal as they are resistant to impact and abrasion. With these trims you see no damage done to either the inner wall or the outer protective unit so the appearance remains of high quality. So there is no need to replace these annually, most come with a guarantee that covers you for the first five years or so.

Modern corner protection comes in a number of colours, lengths and sizes. Most corner protection is made to 90° and 135° angles so they should fit around common building corners. You can attach the protective rails using industrial strength double sided tape or super glue. You can also choose between a range of thicknesses if you know that very high impacts occur in your building.

Looking for ways to save money when it comes to building maintenance is something that we all do. we waste huge amounts of money trying to keep walls looking in pristine condition by regularly painting them, filling holes and smoothing down uneven surfaces. Building managers are constantly on the lookout for loose tiles, plaster or sharp corners because they can be a lot of bother. Not only because they are unsightly but because they can cause harm to people who walk past them. Corner protection and other forms of wall protection like panelling and bump rails can all save money on building maintenance be reducing the need for regular work.

many buildings experience very high volumes of traffic on a day to day basis including supermarkets, hospitals, schools and offices. As well as people, machinery and equipment also moves through the corridors, like wheelchairs, trolleys and hospital beds. When these things come into contact with the walls damage can occur to the corners of walls and this can be dangerous and not nice to look at. To fix this damage there can be expensive repair work needed whether by the building maintenance staff or workers contracted in on high rates of pay.

You can use protective angles to absorb any impact on the corners and prevent damage from being done to the walls underneath. Choose corner trims and angles which are made from PVCu like Vinylac because these are resistant to abrasion and impacts. Your building will stay looking in great condition because there are no marks of damage on the inner walls or the outer protective units. This helps because there is no need to replace the corner trim or angle every year and you should be protected by a guarantee.

You can get corner protection in many sizes, colours and finishes. The most common angles in most buildings is 90° and 135° which are what most units are manufactured to. You can attach the protective rails using industrial strength double sided tape or super glue. If you know that your building is subject to high levels of impact then you can choose a range of thicknesses.

They way you present and maintain your office gives off a lot of information to rivals and visitors. Your company will look better if the office is tidy, stylish and sophistication. Thus, your choice of furniture and decoration is actually very important.Here are my top five tips, from door protection to décor, for revamping your office.

The Welcome
When guests arrive at your offices, they will immediately make judgements based on what they see and how they feel. This is why it’s important that you have a welcoming reception area. Waiting areas should be easy to find and comfortable.Either chairs or sofas are okay, but be sure to find the balance between comfortable and professional.You don’t want your reception area to look like someone’s lounge.

The Décor
Keep it simple. Whole areas or rooms shouldn’t be painted in one overbearing colour. Equally, though, too plain is not good. You can use corporate colours or well chosen bright colours, but perhaps only on feature walls or in artwork.

The Props
Plants add colour to an office and keep the air fresher. Staff are likely to be happier with a few plants.{ Having several plants around the office is a good idea, especially in darker corners. Just don’t let them die.Also, don’t be afraid to show off a little. You could display company products in a cabinet in reception. This personal touch shows visitors what your company is about. You could also consider placing water coolers, neatly organised shelving and industry targeted magazines in reception.

Tidiness
There is often a lot of clutter in kitchen areas and on staff desks. Don’t be afraid to ask staff to clean up their own mess.After all they are adults.On the other hand, don’t go to the other extreme of banning personal items from staff desks. Your personnel will spend most of their week sitting at their desk, so should be entitled to make it their own. Anyway, most visitors will actually appreciate being reminded that your staff are people and not robots.

The Maintenance
You should invest in the right protection for your office.Otherwise you will periodically be forced to reinvest money on repairing cracks and chips to paintwork. Protecting your hard work is just good sense, as not to would defeat the object of restyling your office in the first place. You can buy a range of protective trims for doors and walls and they’re well worth the money.People don’t necessarily realise it, but frequent deliveries, tea trolleys and just high volume of people passing through put walls and doors at risk of chips, scratches and other damage.Simple wall and door protection will eliminate this risk.

We are always looking for ways to save money when it comes to building maintenance because annual bills can be a considerable amount. we waste huge amounts of money trying to keep walls looking in pristine condition by regularly painting them, filling holes and smoothing down uneven surfaces. Building managers are constantly on the lookout for loose tiles, plaster or sharp corners because they can be a lot of bother. they can be unpleasant to look at but more than that, they can cause injury to people passing by. Corner protection and other forms of wall protection like panelling and bump rails can all save money on building maintenance be reducing the need for regular work.

Busy buildings include hospitals, schools, offices and supermarkets. As well as people, machinery and equipment also moves through the corridors, like wheelchairs, trolleys and hospital beds. If these things come into contact with the walls then the result can be unsightly damage that might cause people harm. To fix this damage there can be expensive repair work needed whether by the building maintenance staff or workers contracted in on high rates of pay.

You can use protective angles to absorb any impact on the corners and prevent damage from being done to the walls underneath. Material which absorb impact and do not get defaced are PVCu like Vinylac. This means that not only do they save the corner from damage, but the impact does not lower the quality of the corner protection itself. This helps because there is no need to replace the corner trim or angle every year and you should be protected by a guarantee.

The colour, finish and size of corner protection you choose can be tailor made to your needs. They are manufactured to fit around the most common angles in buildings, which are generally 90° and 135°. You can attach the protective rails using industrial strength double sided tape or super glue. You can also choose between a range of thicknesses if you know that very high impacts occur in your building.

We are always looking for ways to save money when it comes to building maintenance because annual bills can be a considerable amount. Walls are one of the main areas in which money is wasted on regular maintenance work whether that is re-painting, filling or filing. Sharp corners, loose tiles or plaster and unstable materials can all cause building managers trouble. Not only because they are unsightly but because they can cause harm to people who walk past them. Corner protection and other forms of wall protection like panelling and bump rails can all save money on building maintenance be reducing the need for regular work.

many buildings experience very high volumes of traffic on a day to day basis including supermarkets, hospitals, schools and offices. As well as people, machinery and equipment also moves through the corridors, like wheelchairs, trolleys and hospital beds. When these things come into contact with the walls damage can occur to the corners of walls and this can be dangerous and not nice to look at. paying your building maintenance staff and getting supplies needed to fix the damage, or using contracted in workers can be a very expensive job.

Preventing damage being done to the walls and corners can be done by attaching protective material to the corners which absorb impacts and keep the walls smooth. Material which absorb impact and do not get defaced are PVCu like Vinylac. With these trims you see no damage done to either the inner wall or the outer protective unit so the appearance remains of high quality. A guarantee should cover any defects or poor performance for a few years so there will be no annual replacements.

Modern corner protection comes in a number of colours, lengths and sizes. They are manufactured to fit around the most common angles in buildings, which are generally 90° and 135°. The protective shields are attached using industrial strength double sided tape or can be glued on if they are never to be removed. If you know that your building is subject to high levels of impact then you can choose a range of thicknesses.

Looking for ways to save money when it comes to building maintenance is something that we all do. Both time and money are wasted trying to keep walls in top condition with regular re-painting, filling and filing of uneven surfaces. The worst things that happen to walls is loose tiles, chipped plaster and sharp corners which building managers are on the lookout for. Not only because they are unsightly but because they can cause harm to people who walk past them. Corner protection, plastic wall panelling and bump rails are some of the ways in which we can reduce the amount of money spent every year on maintaining the interior of out buildings.

Busy buildings include hospitals, schools, offices and supermarkets. As well as people, machinery and equipment also moves through the corridors, like wheelchairs, trolleys and hospital beds. If these things come into contact with the walls then the result can be unsightly damage that might cause people harm. paying your building maintenance staff and getting supplies needed to fix the damage, or using contracted in workers can be a very expensive job.

Preventing damage being done to the walls and corners can be done by attaching protective material to the corners which absorb impacts and keep the walls smooth. Corner angles and trims made from PVCu materials like Vinylac are ideal as they are resistant to impact and abrasion. With these trims you see no damage done to either the inner wall or the outer protective unit so the appearance remains of high quality. So there is no need to replace these annually, most come with a guarantee that covers you for the first five years or so.

Modern corner protection comes in a number of colours, lengths and sizes. Most corner protection is made to 90° and 135° angles so they should fit around common building corners. The corner protective panels are attached with extremely strong glue or tape. You can also choose between a range of thicknesses if you know that very high impacts occur in your building.